DT Ⅱ B1200 belt conveyor with a diameter of 1000 and a reversing drum

product details

 Why do we need to prevent wear on the conveyor drum of the belt conveyor

1.Expand the sliding friction between the drive drum and the belt conveyor;

2.Can reasonably improve the operation of belt conveyors. In order to avoid the deviation of the belt conveyor, maintain the metal material rollers and vulcanized rubber cloth from being damaged, and ensure that the rollers and rubber cloth run synchronously, thereby ensuring the high efficiency and efficient operation of the belt conveyor;

3.In addition, it will also reduce the adhesion of raw materials on the surface of the drive drum, thereby reducing the direction deviation and damage of the adhesive tape.

Characteristics of the reversing drum

1. Roller material and surface treatment: carbon steel (galvanized), stainless steel, carbon steel (coated/polyurethane, plastic coated, spray coated, etc.), roller shaft length, effective length of cylinder body, pipe wall thickness, etc. can be customized according to user requirements;
2. Carbon steel solid core shaft, coated with blue zinc or made of stainless steel material;
3. The installation form of the shaft can be selected from: spring press in type, internal tooth shaft type, external thread type, full flat tenon type, and through shaft opening pin hole type;
4. Clean and deburr the components before assembly;

5. After assembly, the drum rotates flexibly without any jamming phenomenon;

6. There are no cracks, obvious scratches or other defects on the surface of the cylinder.