DT Ⅱ type B1000 belt conveyor with a diameter of 630 and a reversing drum

Product Details

Why do we need to prevent wear on the conveyor drum of the belt conveyor

1. Expand the sliding friction between the drive drum and the belt conveyor;
2. Can reasonably improve the operation of belt conveyors. In order to avoid the deviation of the belt conveyor, maintain the metal material rollers and vulcanized rubber cloth from being damaged, and ensure that the rollers and rubber cloth run synchronously, thereby ensuring the high efficiency and efficient operation of the belt conveyor;
3. In addition, it will also reduce the adhesion of raw materials on the surface of the drive drum, thereby reducing the direction deviation and damage of the adhesive tape.

The structure and function of the transmission drum and the reversing drum are significantly different.

The transmission drum is divided into two types: the main transmission system and the driven system. There are two ways to drive the main drum: one is the external drum, which means that the motor drives the reducer and then pushes the drum, and the other is the internal window electric drum, which means that the prefabricated components of mechanical equipment such as the motor and deceleration device will be inside the drum.

The transmission drum must be used in conjunction with the motor and reducer of the supporting facilities to drive the belt conveyor and function as a transmission system; The reversing drum, also known as the guiding drum, has no difference in the type of transmission drum structure. It is composed of main shaft bearings, drum rolling bearings, and rolling bearing chambers. The reversing drum is generally located at the end of the belt conveyor, where the conveyor belt changes the direction of exercise.